LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> Cressida >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Wiring Diagrams - 4-CYL (EFI)) >> Wiring Diagrams

Wiring Diagrams

WARNING: This page is about a different car, the 1990 Toyota Pickup. However, it is still accessible from the selected car via links, so may be relevant.

ECT stands for Electronically Controlled Transmission (ECT). Only A/T-equipped vehicles were optionally built with this feature.

To determine if equipped with the ECT system, look around the dashboard area for a switch that allows the driver to put the transmission in "Power" or "Normal" mode. If the switch is present, it is an ECT system. Conversely, the absence of the switch means the system is not ECT-equipped.

Fig 1: Engine Wiring Diagram - Pickup - With ECT (22R-E)
G90B21411Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Engine Wiring Diagram - Pickup - Without ECT (22R-E)
G90C21412Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002