LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> Cressida >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.0L 6-CYL & 3.0L 6-CYL Turbo - VIN [M] >> Removal & Installation >> Front Crankshaft Oil Seal >> Removal & Installation (Timing Case Installed)

Removal & Installation (Timing Case Installed)

Remove timing belt. See TIMING BELT . Using Seal Puller (09308-55010) remove seal from timing case. Apply multipurpose grease to new seal. Using Seal Installer and Driver (09214-60010 and 09506-35010), install new oil seal. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals