LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> Corolla Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - EFI >> Ignition Checks (Except Supra Turbo) >> Pick-Up Coil Resistance Test >> Camry (2VZ-FE), Pickup (3VZ-E) & 4Runner (3VZ-E)

Camry (2VZ-FE), Pickup (3VZ-E) & 4Runner (3VZ-E)

  1. Measure pick-up coil resistance between terminals G1 and G(-), G2 and G(-), and NE and G(-). See Figure through Figure.
  2. If resistance is incorrect, replace distributor. See PICK-UP COIL RESISTANCE table. If resistance is within specification, proceed to PICK-UP COIL AIR GAP CHECK.
scientia non olet · About LEMON Manuals