LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

  1. Place the stabilizer bar bracket to the rear axle housing, and install the cushions and brackets with the bolts. See TORQUE SPECIFICATIONS .
  2. Install the stabilizer link onto the frame. See TORQUE SPECIFICATIONS .
  3. Connect the stabilizer bar on both sides to the links with the nuts. Use new upper nut.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals