LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Rear Suspension (MR2)

Rear Suspension (MR2)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1991 Toyota Tercel, 1991 Toyota Supra, 1991 Toyota Previa, 1991 Toyota Pickup, and 1991 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure rear camber is correct. See WHEEL ALIGNMENT SPECIFICATIONS . If adjustment is necessary, see appropriate adjustment procedure.
  2. Bounce both ends of vehicle several times to settle suspension. Measure rear wheel toe-in. See WHEEL ALIGNMENT SPECIFICATIONS . If necessary, adjust rear toe-in by rotating rear tie rod sleeves.
scientia non olet · About LEMON Manuals