LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Rear Suspension (Cressida & Supra)

Rear Suspension (Cressida & Supra)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1991 Toyota Tercel, 1991 Toyota Supra, 1991 Toyota Previa, 1991 Toyota Pickup, and 1991 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure rear camber is correctly set. See CAMBER ADJUSTMENT  under WHEEL ALIGNMENT PROCEDURES. Bounce both ends of vehicle several times to settle suspension.
  2. Measure toe-in. If toe-in is not within specification, adjust by turning adjustment cam. See WHEEL ALIGNMENT SPECIFICATIONS . See Figure.
scientia non olet · About LEMON Manuals