LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Adjustment >> Front Suspension (Supra)

Front Suspension (Supra)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1991 Toyota Tercel, 1991 Toyota Supra, 1991 Toyota Previa, 1991 Toyota Pickup, and 1991 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check tires for wear and improper inflation. Check front wheel bearings for looseness. Check wheel runout. Wheel runout should not exceed .047" (1.2 mm).
  2. Check front suspension components for looseness. Ensure front shock absorbers work properly. Check vehicle riding height. See RIDING HEIGHT ADJUSTMENT .
  3. Check camber of both front wheels. See WHEEL ALIGNMENT SPECIFICATIONS . If camber is not within specification, loosen and turn adjustment cams. See Fig 1.
Fig 1: Adjusting Front Suspension Camber/Caster (Supra)
G91E02893Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals