LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shafts & Universal Joints - 4WD >> Removal & Installation >> Propeller Shaft >> Installation (Rear)

Installation (Rear)

  1. Connect rear propeller shaft to companion flange on transfer by aligning the matchmarks on the flanges. Connect the flanges with four nuts and bolts. See Figure. Torque the nuts and bolts. See TORQUE SPECIFICATIONS .
  2. Connect propeller shaft flange to companion flange on rear differential by aligning the matchmarks on the flanges. Connect the flanges with four nuts and bolts. See Figure. Torque the nuts and bolts. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals