LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shafts & Universal Joints - 4WD >> Removal & Installation >> Propeller Shaft >> Disassembly(Front & Rear Propeller Shaft)

Disassembly(Front & Rear Propeller Shaft)

Place matchmarks on the sleeve yoke and shaft.Pull out the sleeve yoke from the shaft. Remove sleeve yoke from both front and rear propeller shafts. See Fig 1.

Fig 1: Disassembling Front & Rear Propeller Shafts
G00140259Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002