LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Drum Brake Shoes (2WD) >> Removal

Rear Drum Brake Shoes (2WD): Removal

  1. With brake drum removed, disconnect upper tension springs. See Figure. Remove adjusting cable, cable guide, adjusting lever and guide plate. Remove adjuster lever tension springs and strut. Remove hold-down springs and pins.
  2. Pull brake shoes from backing plate. Separate adjuster mechanism and tension spring. Disconnect parking brake cable from lever. Secure rear shoe and remove "C" washer retaining parking lever to shoe. Remove parking brake lever.
scientia non olet · About LEMON Manuals