LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Axle Bearing & Oil Seal (4WD) >> Removal

Rear Axle Bearing & Oil Seal (4WD): Removal

  1. Remove wheel and brake drum. Remove nuts retaining axle shaft. Remove axle shaft. Using seal remover to remove oil seal from axle shaft tube.
  2. Remove lock nut. Remove outer wheel bearing and lock plate. Remove hub assembly. Using seal remover, remove oil seal from hub. Remove inner wheel bearing.
scientia non olet · About LEMON Manuals