LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster (CELICA & Supra) >> Removal

Instrument Cluster (CELICA & Supra): Removal

  1. Turn ignition switch to LOCK position. Disconnect negative battery cable. Wait at least 20 seconds before continuing. Place front wheels in straight-ahead position.
  2. Unscrew 4 Torx screws on side covers until groove along screw circumference catches on screw case. Pull wheel pad out from steering wheel and disconnect air bag connector.
    CAUTION: When removing wheel pad, DO NOT pull on air bag wiring harness. When storing wheel pad, ensure upper surface of pad faces upward.
  3. Disconnect wiring connector. Remove steering wheel nut. Remove steering wheel with steering wheel puller. Remove steering column covers. Remove retaining screws. Remove trim panel over instrument cluster.
  4. Remove instrument cluster retaining screws. Pull instrument cluster out far enough to disconnect speedometer cable and harness connectors. Remove instrument cluster.
scientia non olet · About LEMON Manuals