LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1990 >> 4Runner 2D Utility, 2.4 R, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster (CAMRY) >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Remove steering wheel pad. Remove steering wheel nut. Remove steering wheel using steering wheel puller. Remove steering column covers.
  2. Remove 5 finish panel retaining screws and remove instrument cluster finish panel. Disconnect connectors.
  3. Remove 4 instrument cluster retaining screws and pull instrument cluster out. Disconnect wiring harness connectors and speedometer cable. Remove instrument cluster. To install, reverse removal procedure. Tighten steering wheel nut to 26 ft. lbs. (35 N.m).
scientia non olet · About LEMON Manuals