LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1988 >> 4Runner Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L 4-CYL & 2.4L 4-CYL Turbo - VIN [R] >> Removal & Installation >> Valve Stem Oil Seals

Valve Stem Oil Seals

  1. Using a spring compressor, remove valve keepers. Remove spring retainer and springs. Remove valve stem oil seal from end of valve guide.
  2. Slide a new oil seal over valve stem, using care not to damage seal as it passes over keeper grooves. Force seal over end of valve guide. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals