LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1988 >> 4Runner Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L 4-CYL & 2.4L 4-CYL Turbo - VIN [R] >> Overhaul >> Piston Pin Replacement >> Removal

Piston Pin Replacement: Removal

Remove piston pin snap ring. Heat piston in hot water to 140°F (60°C). Using hammer and driver, push piston pin out of piston and connecting rod.

scientia non olet · About LEMON Manuals