Valves & Valve Springs Specifications
VALVES & VALVE SPRINGS SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Intake | |||
| Head Diameter | n/a | ||
| Stem Diameter | .3138-.3144 (7.970-7.985) | ||
| Face Angle | 44.5° | ||
| Minimum Margin | .024 (.60) | ||
| Maximum Refinish | n/a | ||
| Springs | |||
| Free Length | 1.91 (48.5) | ||
| Out-Of-Square | .063 (1.6) | ||
| Installed Height | 1.594 (40.5) | ||
| Pressure Lbs. @ In. (Kg @ mm) | |||
| Valve Closed | n/a | ||
| Valve Open | n/a | ||
| Exhaust | |||
| Head Diameter | n/a | ||
| Stem Diameter | .3136-.3142 (7.965-7.980) | ||
| Face Angle | 44.5° | ||
| Minimum Margin | .024 (.6) | ||
| Maximum Refinish | n/a | ||
| Springs | |||
| Free Length | 1.91 (48.5) | ||
| Out-Of-Square | .063 (1.6) | ||
| Installed Height | 1.594 (40.5) | ||
| Pressure Lbs. @ In. (Kg @ mm) | |||
| Valve Closed | n/a | ||
| Valve Open | n/a | ||