Cylinder Head Specifications
CYLINDER HEAD SPECIFICATIONS
| Application | In. (mm) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Maximum Cylinder Head Warp (1) | .006 (.15) | |||||||||
| Seat Angle | 45° | |||||||||
| Maximum Runout | n/a | |||||||||
| Seat Width | .05-.06 (1.2-1.6) | |||||||||
| Seat Bore Diameter | n/a | |||||||||
| Valve Stem Oil Clearance | ||||||||||
| Intake (2) | .0010-.0024 (.025-.061) | |||||||||
| Exhaust (3) | .0012-.0026 (.031-.066) | |||||||||
| Valve Guide Inside Diameter | .315-.316 (8.01-8.03) | |||||||||
| Valve Guide Bore (4) | .5118-.5125 (13.000-13.018) | |||||||||
|
||||||||||