Cylinder Block Specifications
CYLINDER BLOCK SPECIFICATIONS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Maximum Block Warp | .002 (.051) | ||||
| Cylinder Bore | |||||
| Standard Diameter (1) | |||||
| Mark "1" | 3.6220-3.6224 (92.00-92.01) | ||||
| Mark "2" | 3.6224-3.6228 (92.01-92.02) | ||||
| Mark "3" | 3.6228-3.6232 (92.02-92.03) | ||||
| Maximum Taper | .0008 (.02) | ||||
| Maximum Out-of-Round | .0008 (.02) | ||||
|
|||||