LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1988 >> 4Runner Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Parking Brake >> Pickup/4Runner (4WD)

Pickup/4Runner (4WD)

  1. Loosen lock nut on bellcrank adjuster bolt at rear of backing plate. Tighten adjuster bolt until there is no play in linkage. Loosen bolt one turn and tighten lock nut.
  2. Move both adjusting nuts on intermediate lever in opposite direction until lever travel is correct. Tighten both adjusting nuts. Check bellcrank adjuster bolt. Bolt must contact backing plate when lever is released.
scientia non olet · About LEMON Manuals