LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1988 >> 4Runner Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster >> Cressida

Instrument Cluster: Cressida

  1. Disconnect negative battery cable. Remove trim panel under instrument cluster. Remove rear wiper switch, antenna switch and instrument light dimmer knob. To install, reverse removal procedure.
  2. Remove instrument cluster cover panel. Disconnect speedometer cable. Remove cluster retaining screws and pull instrument cluster out. Disconnect wiring and remove instrument cluster. To install, reverse removal procedure.