LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Van LE, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [Y] >> Removal & Installation >> Timing Chain & Gear >> Removal

Timing Chain & Gear: Removal

  1. Remove camshaft sprocket bolt and remove sprocket and chain. Pull crankshaft sprocket from crankshaft. Check sprockets for wear.
  2. Wrap chain completely around crankshaft sprocket. Measure outside diameter of rollers with a Vernier caliper. If less than 2.34" (59 mm), replace sprocket. Measure camshaft sprocket in same manner. If less than 4.49" (114 mm), replace sprocket. See Figure.
scientia non olet · About LEMON Manuals