LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Van LE, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [Y] >> Removal & Installation >> Timing Chain & Gear >> Installation

Timing Chain & Gear: Installation

  1. To correctly install sprockets and timing chain, set No. 1 piston to TDC of compression stroke. Align camshaft dowel pin with mark on thrust plate. Align timing chain marks with those on sprockets. See Fig 2.
  2. Install timing chain and sprockets together. Apply a light coat of oil to camshaft sprocket bolt and tighten. Install chain tensioner and vibration damper. Install timing chain cover and crankshaft pulley.
Fig 1: Measuring Chain & Sprocket for Wear
G80494Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Aligning Marks for Timing Chain & Sprocket Installation
G80495Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals