Drive Axle Specifications
PINION BEARING PRELOAD
| Application |
INCH Lbs. (N.m) |
| New Bearings |
10.4-16.5 (1.18-1.87) |
| Used Bearings |
5.2-8.7 (.59-.99) |
TOTAL STARTING PRELOAD SPECIFICATIONS
| Application |
INCH Lbs. (N.m) |
| All Models |
3.5-5.2 (.4-.6) |
AXLE ASSEMBLY SPECIFICATIONS
| Application |
In. (mm) |
| Axle Shaft Flange Runout |
.004 (.10) |
| Axle Shaft Runout |
.059 (1.50) |
| Drive Pinion Flange End Play & Runout |
.004 (.10) |
| Drive Pinion-to-Ring Gear Backlash |
.005-.007 (.13-.18) |
| Ring Gear Runout |
.003 (.07) |
| Side Gear-to-Pinion Gear Backlash |
.002-.008 (.05-.20) |