Axle Assembly Specifications
AXLE ASSEMBLY SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Drive Pinion Flange Runout | .004 (.10) | ||
| Pinion Oil Seal Depth | .79 (2.0) | ||
| Pinion-to-Ring Gear Backlash | .005-.070 (.13-.18) | ||
| Side Gear Shaft Deviation | .004 (.10) | ||
| Side Gear Backlash | .002-.008 (.05-.20) | ||
| INCH Lbs. (N.m) | |||
| Drive Pinion Preload | |||
| Starting (Without Differential) | |||
| New Bearings | 9-14 (1.0-1.6) | ||
| Used Bearings | 4.5-7 (.5-.8) | ||
| Total (With Differential) | |||
| New Bearings | 11.6-18 (.7-2.0) | ||
| Used Bearings | 7-11 (.8-1.2) | ||