LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Van LE, RWD >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear (RWD Except CRESSIDA Sedan) >> Removal & Installation >> Upper & Lower Control Arms >> Removal

Upper & Lower Control Arms: Removal

  1. Raise and support vehicle. Support rear axle housing with floor jack. Remove nuts and bolts holding upper control arm to body and to axle housing.
  2. Remove upper control arm. Remove nuts and bolts attaching lower control arm to body and to rear axle housing. Remove lower control arm.
    NOTE: Use Arbor Press and Bushing Set (09710-14012) when removing or inserting bushings. Press bushings from chamfered side of control arm only.
scientia non olet · About LEMON Manuals