LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Van LE, RWD >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front (2WD) >> Removal & Installation >> Lower Control Arm & Bushing >> Installation

Lower Control Arm & Bushing: Installation

  1. Use bushing set to press bushing into control arm.
    NOTE: Do not apply grease or oil to bushing. Do not press on the inside flange of the bushing.
  2. Complete installation by reversing removal procedure. Tighten lower arm cam nut to specification after vehicle has been lowered to floor and bounced to align suspension. Check wheel alignment.
scientia non olet · About LEMON Manuals