LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Van LE, RWD >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> A/C-Heater System - Manual >> Testing >> Condenser Fan & Idle Up Relays >> Idle Up & Fan Relay No. 3

Idle Up & Fan Relay No. 3

Using ohmmeter, check for continuity between terminals No. 2 and No. 4. If there is no continuity, relay is okay. If there is continuity, replace relay. Apply battery voltage between terminals No. 1 and No. 3. Check for continuity between terminals No. 2 and No. 4. If there is continuity, relay is okay. If there is no continuity, replace relay.

Fig 1: Checking Condenser Fan Relay No. 3
G391255Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002