Removal (2WD Pickup With Duo-Servo Brakes)

1. With brake drum removed, remove upper return springs. Remove adjuster cable, cable guide, adjuster lever and anchor plate.
2. Remove adjuster lever tension springs and strut. Remove hold-down springs and pins. Pull brake shoes from backing plate, separate adjusting mechanism and return spring.
3. Disconnect parking brake cable from lever. Mount rear shoe in vise and remove "C" washer retaining parking brake lever to shoe. Remove parking brake lever. See Fig 1.

Fig 1: Exploded View Of Pickup Duo-Servo Rear Brake

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002