Brake Shoes &/Or Pads: Remove & Replace
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable).
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| All | | 1.8 | | B |
| Front or Rear,Both Sides | | 1.0 | | B |
| Combination Procedure: AXLE SEAL: Replace: |
| Rear,Both | | 0.8 | | B |
| Rear,One Side | | 0.6 | | B |
| Combination Procedure: BRAKE HOSE: Replace: |
| Each Additional | Includes: Bleed Brakes. | 0.2 | | B |
| One | Includes: Bleed Brakes. | 0.3 | | B |
| Combination Procedure: CALIPER: Overhaul: |
| Single Piston,One | Includes: Bleed Brakes. | 0.5 | | B |
| Combination Procedure: CALIPER: Replace: |
| One | Includes: Bleed Brakes. | 0.3 | | B |
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: |
| | 0.5 | | B |
| Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: |
| RWD, Front,Each | Includes: Repack Wheel Bearings. | 0.4 | | B |
| Combination Procedure: DISC ROTOR: Replace: |
| Inboard Mounted,Front | Includes: Repack Wheel Bearings. | 0.5 | | B |
| Combination Procedure: WHEEL BEARING: Repack: |
| w/Inboard Mounted Disc,Front | | 0.8 | | B |
| Combination Procedure: WHEEL BEARING: Replace: |
| RWD, w/Inboard Mounted Disc,One Side,Front | Includes: Repack Wheel Bearings. | 0.8 | | B |