LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Corolla LE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL 8-Valve & 1.6L 4-CYL 8-Valve - VIN [A] >> Engine Lubrication >> Oil Pump >> Removal

Oil Pump: Removal

  1. Raise and support vehicle. Drain engine oil. Remove timing covers and timing belt. Using Oil Pan Sealant Cutter (09032-00100), remove oil pan. DO NOT  use sealant cutter on pump side. DO NOT  damage pan flange.
  2. Remove oil strainer mount bolts and strainer. Remove dipstick and tube. Remove oil pump by tapping pump body with plastic hammer. Disassemble pump cover, drive gear, driven gear, oil seal and relief valve. See Figure.
scientia non olet · About LEMON Manuals