LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Corolla LE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL 8-Valve & 1.6L 4-CYL 8-Valve - VIN [A] >> Engine Cooling >> Water Pump >> Disassembly

Water Pump: Disassembly

  1. Remove water pump suction cover mount bolts and pry off cover. Remove 4 stud bolts from pulley seat. Using hydraulic press and Pump Holder (09236-00100), press pulley seat off pump bearing shaft.
  2. Heat pump body to about 185°F (85°C). Press out bearing, with impeller, from pump body. Press impeller off pump shaft/bearing assembly. Remove seal set from bearing assembly.
scientia non olet · About LEMON Manuals