LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1987 >> Camry Base, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear (Fwd) >> Removal & Installation >> Wheel Bearings >> Removal

Wheel Bearings: Removal

  1. Use a hammer and a chisel to loosen staked part of axle nut and remove axle nut. Using Puller (09950-20015), remove axle shaft from axle hub. Using Puller (09950-20015), remove outside bearing inner race from axle shaft. Remove oil seal. Using Bearing Drivers (09228-22020 and 09636-20010), press out bearing.
scientia non olet · About LEMON Manuals