LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> MR2 Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Caliper >> Removal

Front Caliper: Removal

  1. Raise vehicle and support securely. Remove tire and wheel. Disconnect hydraulic line and spring clip. Remove caliper mounting bolts or slide pins as necessary. Remove brake pads as described in FRONT PADS for specific models.
  2. On models with fixed main pin, pivot caliper up to clear edge of rotor. Slide caliper off main pin. On all other models, remove caliper from knuckle or torque plate.
scientia non olet · About LEMON Manuals