Engine Specifications
GENERAL SPECIFICATIONS
| Application |
In. (mm) |
| Displacement |
| Cu. In. |
96.8 |
| Liters |
1.6 |
| Fuel System |
Fuel Injecter |
| HP @ RPM |
112 @ 6600 |
| Torque Ft. @ RPM |
97 @ 4800 |
| Compr. Ratio |
9.0:1 |
| Bore |
3.19 (81.0) |
| Stroke |
3.03 (77.0) |
VALVE SPECIFICATIONS
| Application |
In. (mm) |
| Intake |
| Head Diameter |
N/A |
| Face Angle |
44.5° |
| Seat Angle |
45° |
| Seat Width |
.039-.055 (1.00-1.40) |
| Stem Diameter |
.2350-.2356 (5.970-5.985) |
| Stem Clearance |
.0010-.0024 (.025-.060) |
| Valve Lift |
N/A |
| Exhaust |
| Head Diameter |
N/A |
| Face Angle |
44.5° |
| Seat Angle |
45° |
| Seat Width |
.039-.055 (1.00-1.40) |
| Stem Diameter |
.2348-.2354 (5.965-5.980) |
| Stem Clearance |
.0012-0026 (.030-.065) |
| Valve Lift |
N/A |
PISTONS, PINS & RINGS SPECIFICATIONS
| Application |
In. (mm) |
| Piston Clearance |
.004-.005 (.10-.12) |
| Pins |
| Piston Fit |
Press Fit |
| Rod Fit |
Press Fit |
| Rings |
| Ring No. 1 |
| End Gap |
.010-.019 (.25-.47) |
| Side Clearance |
.0012-.0028 (.030-.070) |
| Ring No. 2 |
| End Gap |
.006-.017 (.15-.42) |
| Side Clearance |
.0008-.0024 (.020-.060) |
| Oil Ring |
| End Gap |
.012-.040 (.30-1.02) |
| Side Clearance |
N/A |
CRANKSHAFT MAIN & CONNECTING ROD BEARINGS SPECIFICATIONS
| Application |
In. (mm) |
| Main Bearings |
| Journal Diam. |
1.8892-1.8898 (47.985-48.000) |
| Clearance |
.0005-0019(.012-049) |
| Thrust Bearing |
Center |
| Crankshaft End Play |
.0008-0073 (.202-.185) |
| Connecting Rod Bearings |
| Journal Diam. |
1.5742-15748 (39.985-40.000) |
| Clearance |
.0008-0020 (.020-051) |
| Side Play |
.006-.010 (.15-.25) |
VALVE SPRING SPECIFICATIONS
| Application |
In. (mm) |
| Free Length |
1.7565(44.60) |
| Pressure Lbs. @ In. (Kg @ mm) |
| Valve Closed |
52 @ 1.52 (23.6 @ 38.6 |
| Valve Open |
N/A |
CAMSHAFT SPECIFICATIONS
| Application |
In. (mm) |
| Journal Diameter |
1.0610-1.0616 (26.95-26.97) |
| Clearance |
.0014-.0028 (.035-.072) |
| Lobe Lift |
1.3998-1.4002 (35.555-35.565) |