LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> Camry LE, 4D Hatchback >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Bearings >> Installation

Wheel Bearings: Installation

  1. Use Driver (09316-60010) to press new bearing into hub. Install bearing inner races.
  2. Using Driver (09310-35010), drive oil seal into axle hub. Using Adapter (09636-20010) and Fixture (09228-22020), press inner race with axle hub onto axle shaft. Tighten axle nut to 90 ft. lbs. (123 N.m) and stake axle nut.
scientia non olet · About LEMON Manuals