LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> Camry LE, 4D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL 8 & 16-Valve - VIN [S] >> Removal & Installation >> Timing Belt >> Inspection (Celica GTS)

Inspection (Celica GTS)

  1. Check timing belt teeth for cracks or damage. If tooth damage is found, ensure camshaft, coolant pump or oil pump are not locked. If wear or cracks on flat belt face are found, check for nicks on one side of idler pulley lock.
  2. If wear or damage to only one side of belt is found, check belt guide and alignment of each pulley and sprocket. If noticeable wear is found on belt teeth, check timing cover gasket for damage and proper installation. Ensure there is no foreign material on sprocket teeth.
  3. Check idler pulleys for smooth rotation. Replace if roughness or noise is found. Inspect tension spring free length. Free length is 1.724" (43.8 mm). Installed tension and length is 16.6 lbs. at 2.043" (7.54 kg at 51.9 mm).
scientia non olet · About LEMON Manuals