LEMON Manuals: Even more car manuals for everyone

Home >> Toyota >> 1986 >> Camry LE, 4D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL 8 & 16-Valve - VIN [S] >> Removal & Installation >> Camshaft Oil Seal >> Removal & Installation (Celica GTS)

Removal & Installation (Celica GTS)

Remove camshaft bearing cap and oil seal. Apply grease to new oil seal lip. With camshaft bearing caps installed, install new seal using Driver (SST 09223-50010).

scientia non olet · About LEMON Manuals