LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> Camry LE, 4D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL 8 & 16-Valve - VIN [S] >> Overhaul >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. With cylinder head and oil pan removed, remove connecting rod nuts. Remove rod cap with bearing half. Remove cylinder bore ridge (if present).
  2. Remove piston and rod assembly through top of block. Rod caps must be kept with their respective piston and rod assembly. Connecting rod caps are not interchangeable.
scientia non olet · About LEMON Manuals