LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> Camry LE, 4D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL 8 & 16-Valve - VIN [S] >> Engine Lubrication >> Oil Pump >> Reassembly

Oil Pump: Reassembly

  1. Install relief valve piston, spring and retainer into pump body and secure with snap ring. Insert sprocket in drive rotor and install nut loosely. Hold sprocket in padded jaw vise and tighten nut to 16-23 ft. lbs. (22-31 N.m).
  2. Place driven rotor into pump body with mark facing up. Install new "O" ring in body groove. Install pump body on pump housing.
Fig 1: Exploded View Of Oil Pump
G82182Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals