All Other Models
Remove console box or parking brake lever boot to uncover base of lever. Loosen lock nut or adjusting cap (Land Cruiser). Turn adjusting nut on cable until lever travel is correct. Tighten lock nut or adjusting cap. Install console or boot.
PARKING BRAKE ADJUSTMENT SPECIFICATIONS
| Application | (1) Notches | ||||
|---|---|---|---|---|---|
| Camry | 4-7 | ||||
| Celica | |||||
| Disc | 5-8 | ||||
| Drum | 4-7 | ||||
| Corolla | |||||
| FWD | 5-8 | ||||
| RWD | |||||
| Disc | 6-9 | ||||
| Drum | 5-8 | ||||
| Cressida, MR2, Supra | 5-8 | ||||
| Tercel | |||||
| Sedan | 5-8 | ||||
| Wagon | 6-8 | ||||
|
|||||