LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> 4Runner Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L 4-CYL & 2.4L 4-CYL Turbo - VIN [R] >> Adjustments >> Valve Clearance Adjustment

Valve Clearance Adjustment

  1. Engine must be at normal operating temperature. Remove valve cover and rotate crankshaft until No. 1 piston is TDC on compression stroke. Measure clearance between rocker arm and valve stem. Adjust No. 1 and No. 2 intake valves and No. 1 and No. 3 exhaust valves.
  2. Rotate crankshaft one complete revolution (360 degrees) and align timing mark at TDC. Adjust remaining valves.
VALVE CLEARANCE ADJUSTMENT

Valve In. (mm)
Intake .008 (.20)
Exhaust .012 (.30)
scientia non olet · About LEMON Manuals