Removal (Pickup & 4Runner With Leading/Trailing Brakes)

1. With brake drum removed, remove return spring and adjuster. Remove front hold-down spring and pin. Remove front shoe and anchor spring.
2. Remove rear hold-down spring, pin and rear shoe. Remove strut and spring from adjusting lever.
3. Disconnect parking brake cable from lever. Using screwdriver, remove "C" washers retaining parking brake lever and adjuster lever to rear shoe. Remove levers from shoe.

Fig 1: Exploded View Of Rear Leading/Trailing Brake This is used on 2WD pickup model.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002