LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> 4Runner Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Rotor >> Removal (Land Cruiser & 4WD Pickup)

Removal (Land Cruiser & 4WD Pickup)

  1. Raise vehicle and support securely. Remove wheels. Remove caliper. Remove flange or free wheel hub. Use tapered punch to open slits of conical washers. Remove axle shaft snap ring.
  2. Using screwdriver, bend back tabs of outer lock washer and remove it. Using Spindle Socket (09607-60020), remove lock nut. Remove inner lock washer and adjusting nut. Remove thrust washer and outer bearing.
  3. Remove axle hub and rotor. Remove grease seal and inner bearing. Press hub bolts out of axle hub. Remove 2 retaining bolts and separate rotor from hub.
scientia non olet · About LEMON Manuals