LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> 4Runner Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Brake Warning Light

Brake Warning Light

  1. Remove connector from pressure warning switch and connect it to ground. Turn ignition on. Light should come on. Reconnect wiring to switch.
  2. With ignition on, light should come on when parking brake lever is pulled up 1 notch and go off when lever is fully released.
  3. With ignition on, brake fluid level warning light should come on with float down and stay off with float up.
scientia non olet · About LEMON Manuals