LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> 4Runner Base, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front (4WD) >> Removal & Installation >> Wheel Bearing >> Removal

Wheel Bearing: Removal

  1. Using Brake Tube Union Wrench (09751-36011), remove brake line from disc brake assembly. Remove disc brake caliper from steering knuckle. Release hub lock washer, using a screwdriver.
  2. Remove lock nut and washer using Adjusting Nut Wrench (09607-60020). Using adjusting nut wrench, remove adjusting nut. Remove hub and disc assembly with outer bearing and washer. Pry out oil seal and remove inner bearing from hub.
scientia non olet · About LEMON Manuals