LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> 4Runner Base, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front (4WD) >> Removal & Installation >> Shock Absorber >> Removal

Shock Absorber: Removal

  1. Raise and support vehicle. Remove wheel assembly. Remove nuts retaining shock absorber to bracket. Remove washers and cushions from shaft of shock absorber.
  2. Remove nuts and bolts securing shock absorber to lower control arm. Fully compress shock absorber and remove from vehicle.
scientia non olet · About LEMON Manuals