LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1986 >> 4Runner Base, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster >> Removal & Installation (Celica)

Removal & Installation (Celica)

  1. Disconnect battery ground. Using a screwdriver, pry off defogger and hazard switches. Disconnect connectors and remove switches. Remove 4 retaining screws. Remove trim panel over cluster.
  2. Remove cluster cover panel. Disconnect speedometer cable. Remove 4 cluster screws and pull cluster out. Disconnect wiring and remove cluster.
scientia non olet · About LEMON Manuals