LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1985 >> Tercel Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [A] & 1.6L 4-CYL SOHC - VIN [A] >> Removal & Installation >> Valve Springs >> Inspection

Valve Springs: Inspection

  1. Using steel square, check squareness of valve springs. Spring must be .08" (2 mm) or less out-of-square. Check free length of springs. Replace any not within limits.
  2. Using spring tester, check tension of each spring at specified installed height. Valve spring installed height is 1.52" (38.6 mm). Minimum installed tension is 46.3 lbs. (21 kg). Replace spring if not to specification.
scientia non olet · About LEMON Manuals