LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1985 >> Tercel Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [A] & 1.6L 4-CYL SOHC - VIN [A] >> Overhaul >> Main Bearing Clearance

Main Bearing Clearance

  1. Check bearings for scoring or wear. Replace if damaged. Clean oil from crankshaft. Check bearing clearance using Plastigage method. Maximum main bearing clearance is .0031" (.080 mm).
  2. If beyond limit, replace main bearing inserts with ones having same number as marked on cylinder block. There are 3 sizes of standard main bearings, marked 1, 2 and 3 accordingly.
scientia non olet · About LEMON Manuals