LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1985 >> Pickup Base, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L 4-CYL & 2.4L 4-CYL Turbo - VIN [R] >> Removal & Installation >> Timing Chain >> Removal

Timing Chain: Removal

  1. Remove cylinder head and oil pan. Remove radiator, drive belts, air pump, and alternator bracket. Set No. 1 cylinder to TDC of compression stroke. Remove crankshaft pulley and water by-pass tube bolts. Remove timing chain cover assembly.
  2. Remove chain from damper. Remove cam sprocket and chain. Using gear puller, remove both oil pump drive and chain sprocket.
scientia non olet · About LEMON Manuals